Structural,optical and electrical properties of Ce0.8Sm0.2-xErxO2-δ (x = 0–0.2) Co-doped ceria electrolytes

This study examined the effects of samarium and erbium co-doping on the structural, optical, and electrical properties of ceria (CeO₂). Ceramic (Ce_0.8Sm_0.2-xEr_xO_2-δ; x?=?0, 0.05, 0.10, 0.15, 0.20) electrolytes were synthesized via sol-gel assisted citric acid–nitrate combustion and calcined at 850?°C for 5?h. The calcined electrolytes possessed a cubic fluorite crystal structure without impure phases. The direct band gap of the calcined electrolytes increased as the erbium content increased and the lowest band gap was obtained for Ce_0.8Sm_0.2O_2-δ (SDC) electrolyte. The calcined electrolyte powders were subsequently pressed into cylindrical pellets by uniaxial die pressing, and the pellets were sintered at 1400?°C for 5?h. The sintered densities of the pellets were measured with Archimedes’ method. The relative density of Ce_0.8Sm_0.1Er_0.1O_2-δ co-doped ceria electrolyte was higher than those of singly doped ones, and these findings were further confirmed through field emission scanning electron microscopy. Electrochemical impedance spectroscopy indicated that the conductivity of erbium-doped ceria increased as the samarium content increased. The maximum total ionic conductivity was observed in Ce_0.8Sm_0.1Er_0.1O_2-δ co-doped electrolyte. However, the singly doped SDC electrolyte exhibited the highest ionic conductivity of 13.12 mS/cm and the lowest activation energy of 0.580?eV at 600?°C among all other Ce_0.8Sm_0.2-xEr_xO_2-δ co-doped ceria electrolytes.     

Prevalence and antibiotic resistance of Salmonella serovars in ducks,duck rearing and processing environments in Penang,Malaysia

An investigation was carried out to determine the prevalence and antibiotic resistance of Salmonella serovars in ducks, their rearing and processing environments in Penang, Malaysia. A total of 531 samples collected from wet markets and duck farms, were examined from August 2009 to October 2010. The overall prevalence of Salmonella serovars was 23.5% (125/531). The 125 Salmonella isolates belong to 10 different serovars namely Typhimirium (29.6%), Enteritidis (12.0%), Gallinarum (2.4%), Braenderup (12.0%), Albany (11.2%), Hadar (20.8%), Derby (6.4%), Weltevreden (1.6%), Newbrunswick (3.4%) and London (0.8%). Salmonella serovars also showed various resistance patterns against 13 different antibiotics. All the serovars were resistant to erythromycin but susceptible to cephalothin, gentamicin and ceftriaxone. Plasmids were detected in 91 (72.8%) of the isolates with sizes ranging from 1.4 to 23.1 Kbp. Our findings provide baseline information on the distribution of Salmonella serovars in ducks, their rearing and processing environments, and indicate that ducks should be considered as an important source of food-borne pathogens.     

Comparative experimental study of sand and binder for flowability and casting mold quality

A good sand mold is an indispensable prerequisite to obtaining a good metal casting. Although sand casting is one of the oldest metal forming technique known to humans, it still has a lot to discover. In a bid to meet the ever-growing demand for quality, economics and increasing environmental restrictions, research is still ongoing to optimize for example the process of making the sand mold. This paper presents a comparative study of six different foundry sands for flowability using simple inexpensive apparatus and some quality parameters achieved by these sands when used with three different types of binder, two organic and one inorganic. The study aims to facilitate the choice of mold materials with a more extensive outlook into their characteristics through a serious of sand and mold tests. A good comparison of already existing materials provides a good reference point when novel materials are investigated. All the sands exhibited ‘good’ flow property according to the simple flowability tests done. However, not the same consensus for flowability rank is reached by all the flow tests. The mold quality tests reveal the strength, loss on ignition and permeability values achieved with each of the binder and sand combination which can also be used in mold material selection.     

A review on conventional and biotechnological approaches in white pepper production

White pepper is the dried seeds obtained from pepper berries (Piper nigrum L.) after the removal of the pericarp. It has been widely used as seasoning and condiments in food preparation. Globally, white pepper fetches a higher price compared to black pepper due to its lighter colour, preferable milder flavour and pungency. Increasing global demand of the spice outpaced the supply as the conventional production method used is laborious, lengthy and also not very hygienic. The most common conventional method is water retting but can also include pit soil, chemical, boiling, steaming and mechanical methods. The introduction of a biotechnological approach has gained a lot of interest, as it is a more rapid, convenient and hygienic method of producing white pepper. This technique involves the application of microorganisms and/or enzymes. This review highlights both conventional and latest biotechnological processes of white pepper production. © 2018 Society of Chemical Industry     

Acid Precipitation versus Solvent Extraction: Two Techniques Leading to Different Lactone/Acidic Sophorolipid Ratios

Sophorolipids (SL) prepared from biotransformation of refined bleached deodorized (RBD) palm olein by Starmerella bombicola (ATCC 22214) occur as a mixture of homologs. Characterization of SL was performed using high-performance liquid chromatography with electrospray ionization mass spectrometry detection (HPLC-ESI-MS) under negative ion mode. Two different purification methods were compared: precipitation and solvent extraction. SL purified by precipitation and solvent extraction consisted of five major homologs with m/z values of 687, 645, 689, 705, and 661. The fractions of lactone and acidic SL via precipitation were 70.24 ± 1.4% and 29.76 ± 1.4%, respectively. SL isolated by solvent extraction contained 44.78 ± 1.9% lactone and 55.22 ± 1.9% acidic SL. Therefore, the purification method strongly impacted the composition of the SL products.     

Polyether polyols as GPC calibration standards for determination of molecular weight distribution of polyether polyols

Average molecular weights (M_n, M_w and M_p) are important characteristics of oligomers and polymers, and therefore there is a need to have a precise and reliable determination method. A gel permeation chromatography (GPC) coupled with a single refractive index detector was used to determine the molecular weight distributions of commercial polyether polyols calibrated against a series of polyether polyols with known molecular weights and low polydispersity. Results of these GPC analyses were compared to the ones calibrated against the commercially available polystyrene (PS) standards. The number‐average molecular weights (M_n) obtained with GPC using polyether polyols calibration were closer to the theoretical values than the M_n obtained using PS as calibration standards. Hence, these GPC analyses using polyether polyols as calibration standards can provide reliable determination of molecular weight distribution of polyether polyols and can be potentially applied to natural oil‐based polyols, including palm oil‐based polyols. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42698.     

Seedless growth of zinc oxide flower-shaped structures on multilayer graphene by electrochemical deposition

A seedless growth of zinc oxide (ZnO) structures on multilayer (ML) graphene by electrochemical deposition without any pre-deposited ZnO seed layer or metal catalyst was studied. A high density of a mixture of vertically aligned/non-aligned ZnO rods and flower-shaped structures was obtained. ML graphene seems to generate the formation of flower-shaped structures due to the stacking boundaries. The nucleation of ZnO seems to be promoted at the stacking edges of ML graphene with the increase of applied current density, resulting in the formation of flower-shaped structures. The diameters of the rods/flower-shaped structures also increase with the applied current density. ZnO rods/flower-shaped structures with high aspect ratio over 5.0 and good crystallinity were obtained at the applied current densities of −0.5 and −1.0 mA/cm². The growth mechanism was proposed. The growth involves the formation of ZnO nucleation below 80°C and the enhancement of the growth of vertically non-aligned rods and flower-shaped structures at 80°C. Such ZnO/graphene hybrid structure provides several potential applications in sensing devices.